WBJEE - Physics (Category - 3) Model Test
Start
Congratulations - you have completed WBJEE - Physics (Category - 3) Model Test.
You scored %%SCORE%% out of %%TOTAL%%.
Your performance has been rated as %%RATING%%
Your answers are highlighted below.
Question 1 |
A circuit consists of three batteries of e.m.f. E1 = 1V, E2 = 2V and E3 = 3V respectively and internal resistance of r = 1 Ω each connected in parallel as shown in figure.
A | The equivalent e.m.f. of the three batteries is Eeq = 2V |
B | Internal resistance of the equivalent battery is 1 / 3 Ω |
C | Potential difference between the points P and Q is VPQ = 2V |
D | Current flowing through the branch containing E1 =1V battery is i1 = 0 amp |
Question 2 |
A bi-convex lens of focal length 10 cm is cut along the horizontal diameter and the two halves are kept 2 mm apart symmetrically about the optical axis as shown in the figure. A monochromatic point source of light is now placed at a distance 10 cm on the optical axis. Then which of the following statements is/are correct?
A | The rays emerging from each lens-half will be converging to a point on the optical axis at a distance of 10 /3 cm from the lens-halves |
B | The rays emerging from each lens-half will be parallel making an angle of 10sup>-2 radian with the optical axis |
C | Rays from each lens-half will be diverging as if the source is on the optic axis at a distance of 10/3 cm behind the lens-halves |
D | The rays emerging from the upper lens-half will appear to come from a point 10 cm behind the lens-halves and 1 mm below the optical axis |
Question 3 |
A moving coil galvanometer has a resistance of 100 Ω and shows full-scale deflection at a current of 100 μA. The galvanometer has to be used as an ammeter in the range of 0–100 mA so that 100 mA is the full-scale deflection current. A resistance R has to be connected in parallel. Then
A | the value of R should be 0.10 Ω
|
B | when this new ammeter measures 100 mA current, the current through the galvanometer is 100 μA |
C | for higher current measurement, the value of R should be larger than the present value of R |
D | this new ammeter can measure both +100mA and -100mA |
Question 4 |
When a potential difference is applied across, the current passing through
A | an insulator at 0 K is zero
|
B | a semi-conductor at 0 K is zero |
C | a metal at 0 K is finite |
D | a p-n diode at 300 K is finite, if it is reverse-biased |
Question 5 |
An experiment to measure Y with a set of four wires of same material and same mass but of different lengths and diameters were performed using a frictionless pulling arrangement as shown. Different masses were used to create tension for the measurement of length-extension of each wire. In this experiment, which of the following quantities do /does not vary linearly?
A | For a given applied mass, the extension of length vs diameter of wire |
B | For a given applied mass, the extension of length vs length of the wires |
C | For all wires, the extension of length versus applied mass |
D | For same amount of extension of length of all wires, length of wire vs. the elastic potential energy |
Once you are finished, click the button below. Any items you have not completed will be marked incorrect.
Get Results
There are 5 questions to complete.
← |
List |
→ |
Return
Shaded items are complete.
| 1 | 2 | 3 | 4 | 5 |
| End |
Return
You have completed
questions
question
Your score is
Correct
Wrong
Partial-Credit
You have not finished your quiz. If you leave this page, your progress will be lost.
Correct Answer
You Selected
Not Attempted
Final Score on Quiz
Attempted Questions Correct
Attempted Questions Wrong
Questions Not Attempted
Total Questions on Quiz
Question Details
Results
Date
Score
Hint
Time allowed
minutes
seconds
Time used
Answer Choice(s) Selected
Question Text
All done
Need more practice!
Keep trying!
Not bad!
Good work!
Perfect!